User Manual

Step 2: When you are able to see the Menu, please go to System
Setup -> General Setup -> General Setup -> Display Resolution to
adjust the appropriate resolution, then click Ok. (For larger monitors,
please choose 1024*768.)
Step 3: Connect the NVR to your primary screen via again to check the
dispaly.
Step 3: Normally the hard drive will generate heat when start to work,
please check if it generate heat.
Step 1:Download the EseeCloud client on your computer. (The opera-
tion is on page 14.)
Step 2: Connect the NVR and your computer to the same network.
Step 3: Open the EseeCloud client and search the IP address of the
NVR through the LAN.
Step 4: Enter the IP address of the NVR in the browser for the manage-
ment interface. (Password is empty, namely enter nothing if you did not
set any password. The operation details are in Chapter 8.)
Step 5: Setting->Ordinary->VGA resolution->Save
Step 6: Connect the NVR to your primary screen via again to check the
dispaly.
Set by IP address
20
[e-mail]