User Manual

Record
*Please make sure that the successfully-formatted hard disk is installed in the
equipment before recording. Steps for recording are presented as follows:
There are three record modes:
Motion Detect: Recording is started when a motion alarm is detected.
Schedule: Recording period can be set, which can be recorded in three modes, namely,
Regular, Detect and Alarm.
Manual: Recording is started manually without a division of alarm and motion detect.
Note: The system default is recorded 24 hours a day. If Motion Detect is required to
set, you shall select Detect in the Schedule and open recording function of a
corresponding channel in the setting of Motion Detect, as shown below: