Installation Guide

MODEL
OSK-210
Phillips screwdriver
Tools needed
Assorted Drill Bits
Tools needed
Internal accessories
Tools needed
Glue gun Silicona
Nail bit
Adjustable Wrench
Nail bit
Internal accessories
Tools needed
Percussion Drill
Tools needed
Level
Tools needed
Internal accessories
Tools needed
Package contents
Parts list
Tools Not lncluded
The following instructions will guide
you through the installation of a slid-
ing shower door.
*Glass doors can be installed on
either side.
Frame parts will need to be flipped
over to install the sliding door on the
left or right side.
Check carefully affter opening the box.Make sure there are no missing pieces and the shower doors do not have any cracks.During installation.please be careful with the corners of the glass doors.
They are very fragile.After the shower doors are installed, the sliding doors should be parallel to each other to open and close smoothly, without gaps or water seepage, and the shower and the
bottom basin should be sealed with silicone between them
Add: Oushukang Sanitary Ware,
Jing Yi Village, Gua Li Town, Xiaoshan District,
Hangzhou City, Zhejiang Province, China
Website: www.osk.cn www.oskhome.com
E-mail: [e-mail]
Tel: [phone]
A-1×2
Internal accessories
length：35mm
A-2×2
Internal accessories
length：25mm
B-1×2
Internal accessories
length：40mm
B-2×2
Internal accessories
length：30mm
C×2
Internal accessories
Nail bit
D×1
Internal accessories
size:44*22*31mm
E×2
Internal accessories
length：38mm
M×2
Internal accessories
Handle
N×1
Internal accessories
Nail bit
O×2
Internal accessories
Glass
F×1
Internal accessories
length：28mm
G×2
Internal accessories
length:156mm
H×2
Internal accessories
length:190mm
Internal accessories
Frame accessories
I×2
Internal accessories
Frame accessories
J×1
Internal accessories
Water blocking
K×2
Internal accessories
Water blocking
L×1