Installation Guide

PUSH PUSH
Premier Garden Shed -
Model: J30302G
INSTRUCTIONAL
VIDEOS
PAGE 6
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: J30302G 19/06/15 CUSTOMER SUPPORT - 800-305-4436
INSTRUCTIONS FOR JOINING SPLICED CHANNELS
CSJ
HIGH-SIDE
CHANNEL
LOW-SIDE
CHANNEL
CSJ
CSJ
CSJ
= =
= =
==
=
=
STEP 1.
Position the channels and the CSJ
joiner channel so the center of the
CSJ is in line with the end of each
channel to be joined together.
STEP 2.
Join the first channel to the CSJ by inserting the center
of the CSJ (on an angle) to the end of the channel
where the JOIN>> text is marked. Push down one side
of the CSJ until you hear a 'click'.
STEP 3.
Join the second channel to the CSJ
by positioning the <<JOIN end of the
channel at the center of the CSJ
(on an angle). Push the CSJ into
the channel until you here a 'click'.
=
The joined channels should now
look like the picture above with the
CSJ positioned equally inside of the
joined channels.
FINISHED CHANNEL
=
NOTE: THE TEXT MARKED ON ALL PARTS MUST BE SHOWN ON THE SAME SIDE AS EACH OTHER.
JOIN>> <<JOIN
JOIN>>
JOIN>>
SJ
JOIN>>
<<JOIN
JOIN>> <<JOIN
J
CSJ
DRILL 4 x (2 PER A SIDE) HOLES
USING No. 30 DRILL TO SECURE
SECTIONS TOGETHER. (THESE
SCREWS MAY HAVE TO BE
TEMPORARILY REMOVED AND
REPLACED DURING LATER
ASSEMBLY)