Use and Care Manual

SITE PREPARATION
GENERAL INSTRUCTIONS
A NOTE ON SAFETY
The site for the shed must be level.
It is recommended that the shed be set on a concrete slab and anchored
down appropriately (refer page 15 for details).
Anchor sets are not supplied as standard items with this product.
Before commencing any assembly, read through these instructions in
detail to gain a thorough understanding of assembly methods and
associated details.
Unpack the carton and carefully identify and check off all the parts
against the parts described and illustrated on pages three to five.
Some parts may have sharp edges. It is advisable to wear gloves when
handling these items and safety glasses if drilling holes. Sensible shoes
are highly recommended.
Do not erect your shed in windy conditions, ensure that the shed is
securely anchored to a solid foundation immediately after construction is
completed.
It is highly recommended to erect the shed with two or more people.
TOOLS REQUIRED
PAGE 2
ABSCO INDUSTRIES ASSEMBLY INSTRUCTION - MODEL: 30292H 26/11/10
3mm
4mm
OPTIONAL
Absco Highlander Shed - Model: 30292H