4+ WARNING: This product is only for 14 years old or above
Introduction to your Absima CR6S 2.4 GHz remote control Thank you for choosing a remote control from Absima. You get an absolute high performance product with state-of-the-art functionality. Please read the instruction manual carefully before using it for the first time. The basic safety and warning instructions are an integral part of these instructions and form the basis for handling the product. In this way, you avoid damage that may result from improper use.
FEATURES: 2.4GHz FHSS technology, 6 channels frequency-hopping spread spectrum, highly resistant to anti-jamming. Receiver response time is 3ms, ensuring a fast response and better control. Smooth and highly sensitive to control inputs and stable at distances 400-500m Compatible with a variety of vehicles; suitalbe for RC cars, RC boats and RC tanks...etc. With brake and fail safe out of control protection function. Each 3 channels can be set respectively, supporting mixed control for 1 and 2 channels.
LED lights: Direction control mode for servo normal steering: Blue light is always on. Mixed direction control mode for tank: Red light is always on. Low voltage warning: Light flashes slowly. Enter into the Programming mode: Light fast flashing. LED light Channel 5 and Channel 6: Channel 5 Press one time CH5 button, indicator LED will stay on and connected servo will move left to end point for 38% and hold. Press second time, LED off and connected servo will move back to normal.
knob for route setting of Channel 3 knob for route setting of Channel 4 Channel 3 button for confirmation Step 4. >>Tune the knob on the panel which at left down corner for end point of Channel 3 (one side), setting as 25%/50%/75%/100%, after setting done, cease for 3 second then press CH3 button for confirm setting, and finish (indicator light stay on). If route of Channel 4 need to do setting, no need to press CH3 for confirmation, just go to Step 5 Step 5.
Warranty Terms By purchasing and using your Absima product, you agree to the warranty terms of Absima GmbH. The warranty applies only to material and/or functional defects already present at the time of purchase of the product. Excluded from the guarantee: • • • • Damage caused by incorrect use Damage due to neglect of duty of care Damage due to improper handling and maintenance errors Fluid damages Please report warranty claims to your dealer.
