Instructions

2.4GHz FHSS technology, 6 channels frequency-hopping spread spectrum, highly resistant to anti-jamming.
Receiver response time is 3ms, ensuring a fast response and better control.
Smooth and highly sensitive to control inputs and stable at distances 400-500m
Compatible with a variety of vehicles; suitalbe for RC cars, RC boats and RC tanks...etc.
With brake and fail safe out of control protection function.
Each 3 channels can be set respectively, supporting mixed control for 1 and 2 channels.
Voltage range of transmitter: 4.8V - 12V (support 1s-3s battery), automatic identification of voltage,
low voltage warning on 7.4V/4.8V
Voltage range of receiver: 3.3V-10V, working current 30mA, supports high voltage servo.
Unique throttle speed limit adjustment function, allows beginners to practive at a safe speed.
Channel 5 and 6 press for lock and press for release, function specially for Crawler accessories.
FEATURES:
CHANNEL FUNCTION:
CH1: Reverse for steering
CH1: Sub-trim for steering
CH1: EPA for steering
CH2: Reverse for throttle
CH2: Sub-trim for throttle
CH2: EPA for throttle
Channel 5
Channel 6
Antenna
Channel 1 (Steering)
Channel 2 (Throttle)
Channel 3
Battery case
Channel 4
Power
On / Off
Simulator/
PPM interface
USB Connection
(only for up to 5V MAX.)
BASIC OPERATION:
Battery installation:
1. Open the battery compartment cover.
2. Insert 4 x ”AA” batteries or 2S Li-Po batteries
with correct polarity. (No response if batterypolarity reversed)
3. Put back battery compartment cover
The battery socket is equipped with
anti-reverse insertion function,
wrong polarity connecton will not
damage the transmitter.
2S Li-Po rechargable battery pack
Binding process:
1. Power on Transmitter
2. Power on Receiver and press button on side of receiver,
LED indicator fast ashing means entering into
binding mode, the receiver will automatically
searching for the nearest transmitter signal for
Binding.
3 . The indicator will always ON after
successful bound.
Binding button
Rope