Specifications

g) Steering mix

This function allows you to set four different steering modes on

the model.

„Front side“:

Only the front wheel steering is controlled.

„Rear side“:

Only the rear wheel steering is controlled.

„Same Phase“:

Front and rear wheels are equal sorted controlled.

„Rev. Phase“:

Front and rear wheels are driven oppositely.

Select the parameter to be changed to adjust the desired

steering mode. Tap the button "back" in order to save the

changes and return to the menu.

This feature allows to set the behavior of the throttle/brake trigge near

its neutral position.

Throttle neutral

„Forward“:

Here the point is defined at which the model begins the operation

of the acceleration.

„Dead zone“:

Here the size of the neutral position is defined in which the

throttle/brake trigger elicits no response.

„Backward“:

Here the point is defined at which the model begins upon

actuation of the braking.

Select therefor the parameter to change. Move the controller to

the right or left to adjust the value according to your wishes.

Tap the button "back" in order to save the changes and return to

the menu.

Picture 17

Picture 18