Manual

Page 2 of 7

STAGE 1 MOD: Vertical waveshaping for subtle phasing and PWM-style effects

STAGE 2 MOD:

Inward wavefolding for additional harmonics and harder PWM-style effects

STAGE 3 MOD: Feedback and saturation amount fed back into stage 1

INPUT GAIN/ATTEN: Pre-effect gain/attenuation up to +/- 50

% at SIGNAL IN

STAGE 1 CV: Sets the level of the external CV input for stage 1 from 0% to 100%

STAGE 2 CV: Sets the level of the external CV input for stage 2 from 0% to 100%

STAGE 3 CV: Sets the level of the external CV input for stage 3 from 0% to 100%

OUTPUT GAIN/ATTEN: Post-effect gain/attenuation up to +/- 50% at the full- and half-wave outputs

STAGE 1 CV IN: DC-coupled input for external CV. Accepts up to +/-10V AC and DC signals

STAGE 2 CV IN: DC-coupled input for external CV. Accepts up to +/-10V AC and DC signals

STAGE 3 CV IN: DC-coupled input for external CV. Accepts up to +/-10V AC and DC signals

SIGNAL IN: Main DC-coupled input. Accepts up to +/-10V AC and DC signals

HALF-WAVE OUT: DC-coupled, half-wave rectified output, allows positive AC and DC signals

FULL-WAVE OUT: DC-coupled, full-wave output, allows +/- AC and DC signals

MOUNTING HOLES: Accepts M2.5 or M3 screws in Doepfer or Analogue Systems spacing width

1: Front