Safety Data Sheets (SDS)

ManualsBrandsABTCO ManualsBuilding materials12" x 12' Khaki Solid Beaded Vinyl Soffit

Page 1 of 3

SAFETY DATA SHEET

PVC Siding

Product: PVC Siding

Common Name: Vinyl Siding

Manufacturer: KP Building Products KP Building Products, Ltd

820 Highway 7 N, 323 RR#3 Main Street North

Holly Springs 38635 Acton, Ontario L7J 2L9

(662) 252-9991 (519) 853-1230

Product Use: Building Material

Emergency Tel.: 1-802-865-0114

This product is not expected to create any unusual emergency hazard under normal conditions of use. It is solid, non-

reactive and non-combustible material.

Routes of Exposure: Inhalation, eye and skin contact.

Inhalation: Dusts created by drilling, cutting or grinding may cause irritation of respiratory tract.

Eyes: Possible irritation of the eye during drilling, cutting or grinding of the product.

Skin: Not expected under normal conditions of use.

Ingestion: Not a likely route of entry.

Vinyl siding is a PVC produced product and the formulation has a proprietary KP Ultra-Vinyl formula.

Inhalation: Immediately remove the affected victim from exposure. Keep at rest. Call for prompt medical

attention if symptoms persist.

Eye Contact: Flush eyes with large amounts of water until irritation subside. Do not rub or scratch your eyes.

If irritation persists, get medical attention.

Skin Contact: Not a normal route of harmful exposure.

Ingestion: Not a normal route of exposure.

Extinguishing Media: Use any media suitable for surrounding fire.

Equipment/Instructions: Firefighters should wear self-contained breathing apparatus and protective clothing.

Do not release contaminated water into soil or drains.

Hazardous Combustion Products: The decomposition products may include and are not limited to carbon dioxide and

monoxide, chlorine etc. The product should not be burnt as construction waste.

Containment Procedure: Not applicable.

Clean-up Procedure: Before attempting clean up, refer to hazard data given above. Sweep up material

(without raising dust) and collect into an appropriate container for disposal.

Rinse area with water. Prevent large spills from entering sewers or waterways.

IDENTIFICATION

2.HAZARD IDENTIFICATION

3.COMPOSITION/INFORMATION ON INGREDIENTS

4.FIRST

AID MEASURES

5.FIRE

FIGHTING MEASU

RES

6.ACCIDENTAL RELEASE MEASURES

Summary of content (3 pages)

PAGE 1
SAFETY DATA SHEET PVC Siding 1.IDENTIFICATION Product: PVC Siding Common Name: Vinyl Siding Manufacturer: KP Building Products 820 Highway 7 N, Holly Springs 38635 (662) 252-9991 Product Use: Building Material KP Building Products, Ltd 323 RR#3 Main Street North Acton, Ontario L7J 2L9 (519) 853-1230 Emergency Tel.: 1-802-865-0114 2.HAZARD IDENTIFICATION This product is not expected to create any unusual emergency hazard under normal conditions of use. It is solid, nonreactive and non-combustible material.
PAGE 2
7.HANDLING AND STORAGE Handling: Storage: Handle material in a manner to prevent damage. Do not allow siding material to crease. Use standard hygiene measures when handling the product. Prior to application, vinyl siding should be stored in an area that is clean, dry and out of direct sunlight. 8.EXPOSURE CONTROLS/ PERSONAL PROTECTION Engineering Controls: No special measures are necessary. General ventilation is adequate. Personal Protective Equipment Eye/Face/Hand: Not normally required.
PAGE 3
12.ECOLOGICAL INFORMATION Ecotoxicity Effect: No information available Environmental Effect: No information available 13.DISPOSAL CONSIDERATION Waste codes: The product is not regulated as hazardous waste. Disposal instruction: Dispose it according to current local regulations. 14.TRANSPORT INFORMATION This product is not classified as dangerous/hazardous material for transport. 15.REGULATORY INFORMATION WHMIS classification: As MANUFACTURED article it is exempt from the classification.