User's Manual

English

4.2 Camera description

5. Installation

5.1 Pairing the camera and monitor

To connect a camera with the monitor, proceed as follows:

1. Connect the power supply to the cameras and monitor.

2. - 4) and

confirm your choice with OK. The systems starts a 60 second countdown.

3. During the 60 seconds, press the PAIRING button on the camera cable until the green LINK LED on

the front of the camera starts to flash.

4. Once the connection is successful, the LINK LED on the camera lights up continuously.

Antenna

Light sensor

Fixed lens

Power LED

LINK LED

IR LED

PIR sensor

Camera mount

Pairing button

Power supply connection

5 V DC/1 A

Warning:

Please note that connection can take up to 60 seconds.