Installation guide

3. Features
All flush mount / surface mount cameras of the ECOLINE series have the
following functions:
a) Auto electronic shutter (AES)
b) Auto gain control (AGC)
c) Auto white balance (AWB)
d) Digital signal processing (DSP)
4. Precautions
To reduce the risk of electric shock, do not remove cover (or back) – there are
no user serviceable parts inside. Refer servicing to qualified service personnel.
Do not expose the camera to rain or moisture or try to operate in
wet areas. This camera is designed for indoor use only. If the camera
becomes wet, turn the power off immediately and ask a qualified service
technician to check it before turning the power on again.
Never point the camera towards the sun. Whether the camera is in use
or not, never aim the CCD at the sun or other very bright objects (laser light).
This can damage the CCD element and create white dots on the monitor, a sign
that CCD pixels are destroyed.
Operate the camera only within the specified temperature,
humidity and power ranges. Operating the camera outside the prescribed
ranges can lead to reduced product life and early malfunction. Greatly
exceeding the specified operating ranges can also result in immediate failure of
13