Installation User guide

10.3 Detectors

10.3.1 Door and window contacts

Door and window contacts monitor the opening of doors

and windows. To activate the entry/exit delay time, at least

one contact should be mounted on the main entrance

door on which a control unit is also mounted.

For transparency reasons, no more than ten door/window

contacts should be used per alarm zone. If the magnet of

the reed contact of the detector is removed, the switch

contact is opened and the alarm zone is interrupted.

Please read the instructions for your door/window

contacts.

Connection example:

10.3.2 Infrared sensitivity detector

Infrared sensitivity detectors detect the infrared heat

movement of living creatures and must not be used

indoors. For transparency reasons, avoid using motion

sensors with door/window contacts in a zone.

Connection example:

Reed

net