Operating instructions

Post data:

fimage=<file name>[&return=<return page>]\r\n

\r\n

Server will accept the upload file named <file name> to be upgraded the firmware and return with

<return page> if indicated.

IP filtering

Note: This request requires administrator access privilege

Method: GET/POST

Syntax:

http://<servername>/cgi-bin/admin/ipfilter.cgi?

method=<value>&[start=<ipaddress>&end=<ipaddress>][&index=<value>]

[&return=<return page>]

PARAMETER VALUE DESCRIPTION

Method addallow Add a set of allow IP address range to server. Start and

end parameters must be specified. If the index parameter

is specified, it will try to add starting from index position.

adddeny Add a set of deny IP address range to server. Start and

end parameters must be specified. If the index parameter

is specified, it will try to add starting from index position.

deleteallow Remove a set of allow IP address range from server. If

start and end parameters are specified, it will try to remove

the matched IP address. If index is specified, it will try to

remove the address from given index position. [start, end]

parameters have higher priority then the [index] parameter.

deletedeny Remove a set of deny IP address range from server. If start

and end parameters are specified, it will try to remove the

matched IP address. If index is specified, it will try to

remove the address from given index position. [start, end]

parameters have higher priority then the [index] parameter.

start <ip address> The start IP address to add or to delete.