Product data

150
151
ABUS Security-Center
150
151
Article number SG3210
Sounders, Sirenes and Siren Dummy
The non-functio-
ning siren (with
ash) is the most
cost-effective form
of building security.
Original housing•
Cannot be distinguished from func-•
tioning sounders
Colour: Housing: white, ashing •
light: red
Siren and ash
dummy
Article number SG1800 SG1805 SG1810
Degree of protection IP43 IP43 IP43
Volume 117 dB 117 dB 117 dB
Required emergency power battery Battery 12 V / 2.1 Ah (BT2020)
Temperature range -25 to +70 °C
Certications VSÖ, Incert
Anti-sabotage monitoring Wall/cover
Light colour Red Orange Blue
Type of light LED LED LED
Flash frequency 1 Hz 1 Hz 1 Hz
Dimensions in mm 220x300x91
Operating voltage 12 VDC
Amperage (in the event of an alarm) 200 mA (with battery), 1.6 A (without battery)
Power consumption 7.2 W
Proline sounders
This professional sounder is
the critical link in a completely
functioning alarm chain. In the
event of an alarm, this extremely
powerful sounder generates a
very loud tone with more than 117
dB of acoustic pressure - this is
almost twice as loud as comparable
devices! The duration of the alarm
can be programmed. In addition
to the acoustic alarm there is a
visual alarm in the form of a bright,
ash light which is visible from
far off. It is possible to control the
siren and the ash light separately.
Depending on the model, the ash
light are available in red, yellow
and blue. This means that the
ash light can continue to ash
until the alarm system is manually
reset, while the acoustic alarm
ends after a predetermined period
of time. Other setting variants are
possible via the jumper and DIP
switches. The sounder is protected
against tamper via a cover and
tamper-proof seal contact. The
sounder meets EN requirements
and has space for a tting 2.1 Ah
battery. This allows you to
achieve autonomous operation,
independent from the power grid
and the panel. The advantage: In
the event of an alarm situation,
the alarm cannot be prevented by
tampered cables and the panel
cannot be overloaded due to
service peaks. Reliable triggering of
the alarm is guaranteed under any
circumstances.
Flash frequency: 1 Hz •
Tamper monitoring•
Wall and cover contact•
Volume: 117 dB(A) at 1 m•
Space for 12 V/2.1 Ah battery (not in •
delivery kit)
required power supply: 13.8 VDC, •
200 mA (with battery), 1.6 A
(without battery)
Operating temperature: -25 °C to •
+70 °C
Certications: VSÖ, Incert, EN•
Weight: 2,000 g (without batteries)•
Dimensions (WxHxD): •
220x300x91 mm
Required accessories:
12 V VdS battery 2.1 Ah (BT2020)
Colour options