Technical data

A1 - IX
4.4. Zone name prompts
This function is activated as follows and zone names are recorded:
User Menu
Æ Facilities On/Off Æ Zone Name Prompts Æ Enabled Æ Yes
The following additional prompt is then announced:
• With opened zone
Æ “The System cannot set” + “<Zone name prompts>”
When several zones are open, the zone with the smallest zone number is also announced.
• In the event of an alarm
o Speech dialler: The first triggered zone is also announced after “Home Message” and “Message x”.
o Alarm centre: The first triggered zone is announced for each partition, starting with the partition
with the smallest number.
For example: An alarm is triggered in the following zones in the sequence
described below:
Zone 26 Partition 3
Zone 25 Partition 1
Zone 3 Partition 1
The following can be heard on the system:
“The partition is unset! Attention! There has been an alarm!
<announcement zone 25>, <announcement zone 26>.
A reset is required.”