Technical data

46
Select the Delete All menu item.
Confirm deletion by pressing Yes
.
13.5 Adding the zone 01 detector manually
¾ Select Zone 01.
Please ensure that no other active detectors are in the tamper state.
¾ You will now be prompted to activate the Tamper contact.
Example: Motion sensor
¾ The detector was successfully trained.
To ensure satisfactory communication, the signal strength should be
more than 3.
Tamper contact
(wall break contact)
Display of
the s
ignal
s
trength
In the installer menu:
Æ Æ
Select the Add/Del Detectors menu item.