Technical data

ManualsBrandsAbus ManualshomeFU8006

Now program the F3 function key on the arming station.

Call up the installer menu.

Under Other Devices, select the Arming station

menu point.

Under Edit arming station, select the trained Arming station 1.

The trained arming station is indicated by the symbol.

Now select the F3 key.

Select the Output number

menu point.

Now select the (HW)Output 01

Select the Impulse function (approx. 4 seconds).

Go back to the installer menu and change Output 01 to the user

defined setting.

Under Outputs, select the Edit output

menu point.

Edit Output 01 and select User Defined as type.

Now go back to the operating mode.

You can now switch output 01 using the F3 function key.

Arming station (1) F3

(HW)Output 01

(HW)Output 02

(RF)Output 03

(RF)Output 04

Select

Back

INSTALLER MENU

Other Devices

Select

OTHER DEVICES

Ext Sirens

Info Module/Int Sirens

WAM

Arming station

Select

Back

Edit arming station

Arming station 1

Arming station 2

Arming station 3

Arming station 4

Select

Back

ARMING STATION (E)

Add/Del arming station

Edit arming station

Select

Back

OUTPUTS

Add output

Edit output

Select

Back

Edit arming station

F1 key

F2 key

F3 key

F4 key

Select

Back

(HW)Output 01

Name: Output 01

Type: Not used

Edit

Back

Arming station (1) F3

Full Set

Part Set

Unset

Output number

Select

Back

Arming station (1) F3

Off

Toggle

Impulse

Select

Back

INSTALLER MENU

Outputs

Select

(HW)Output 01

Name: Output 01

Type: User Defined

On at: 00 : 00

Off at: 00 : 00

Edit

Back