Technical data

77
20.1 ALARMS
Select the corresponding function. For a list of functions and their attributes, see the
table below.
Function Meaning
Call Mode Settings for reporting alarm messages.
Primary Telecoms Settings for the primary transmission path of alarm
reporting.
Phone Book Used for selecting a phone number for transmitting alarm
messages.
IP Network Settings for transmission over the Internet.
Account Numbers Used for entering the customer account numbers from
the command centre.
Report Type Used for entering the digital command centre report for
transmission of alarms to the command centre.
Fast Format Channel Settings within the Fast Format report.
FF Report Restorals Settings within the Fast Format report for resetting.
SIA Report Mode Settings within the SIA report.
SIA Report Restorals Settings within the SIA report for resetting.
Contact ID Reports Settings within the Contact ID report.
Force Test Call Now Starts a test call immediately.
Dynamic Test Call Settings for the dynamic test call.
Static Test Call Settings for the static test call.
Burg Comms Rearm Settings for automatic reactivation of the transfer in the
Fast Format report.
Send Tamper as Burg Settings for transmitting a tamper alarm as a burglar
alarm.
20.2 Call Mode
Select the corresponding function. For a list of functions and their attributes, see the
table below.
Function Meaning
Deactivated No alarm messages are transmitted to the command
centre.
Single The alarm centre transmits alarm messages to the first
phone number in the phone book together with the first
account number for identification. If transmission if not
confirmed,
the centre repeats the call up to 15 times.
Alternate The alarm centre first transmits alarm messages to the
first phone number in the phone book. If the line is busy,
the alarm is transmitted to the second number in the
phone book. This continues up to 15 times until
confirmed, always alternating between the two phone
numbers.
20.3 Primary Telecoms
Select which primary transmission path should be used. This transmission path is used
as long as transmission is possible using it.