Funk-Überfalltaster Wireless panic button Bouton-poussoir radio à actionner en cas d’agression Tasto radiotrasmittente antiaggressione Draadloze overvaldetector Trådløs overfaldsknap Radiowy przycisk napadowy 1 FU8300 12244846
Vorwort Sehr geehrte Kundin, sehr geehrter Kunde, wir bedanken uns für den Kauf dieses Funküberfalltasters. Mit diesem Gerät haben Sie ein Produkt erworben, das nach dem heutigen Stand der Technik gebaut wurde. Dieses Produkt erfüllt die Anforderungen der geltenden europäischen und nationalen Richtlinien. Die Konformität wurde nachgewiesen, die entsprechenden Erklärungen und Unterlagen sind beim Hersteller hinterlegt.
Batteriewarnhinweise Das Gerät wird über eine 3V Lithium Batterie mit Gleichspannung versorgt.
Einführung Der FU8300 Funküberfalltaster ist optionales Zubehör für die Funkalarmzentrale Secvest. Per Knopfdruck können Sie einfach und diskret einen Überfallalarm auslösen. Je nach Zentraleneinstellung ist dieser still oder lokal. Der Alarm wird auch im deaktiviertern Zustand der Zentrale abgesetzt. Technische Daten Spannungsversorgung: Batterielebensdauer: Umwelklasse: Reichweite: Sicherheitsgrad: Gehäusematerial: Betriebsfrequenz: Abmessung (HxBxT): 3V Lithiumbatterie der Größe CR2477N ca.
Installation Öffnen Sie das Gehäuse, indem Sie die Schraube unter der Abdeckklappe des Tasters lösen und die Gehäuseoberseite abnehmen. Lösen Sie die drei weiteren Schrauben, die den Taster und die Sende-Empfangseinheit mit der Gehäuserückseite verbinden. Bringen Sie nun die Gehäuserückseite des Tasters an der vorgesehenen Stelle an (idealerweise im Eingangsbereich von Wohneinheiten, in Schlafräumen oder unter Ladentischen). Setzten Sie die mitgelieferte Lithiumbatterie der Größe CR2477N mit 3 V ein.
schicken. Die Alarmzentrale erkennt den Taster und ordnet ihm gleich die Zoneneigenschaft „Überfall“ zu. 3. Vergewissern Sie sich, dass der Taster von Ihrer Funkalarmanlage erkannt wurde und verschrauben Sie die Komponenten anschließend wieder. Dieses Gerät erfüllt die Anforderungen der EU-Richtlinie: 1995/5/EG Richtlinie über Funkanlagen und Telekommunikationseinrichtungen und die gegenseitige Anerkennung ihrer Konformität. Die Konformitätserklärung ist zu beziehen unter: ABUS Security-Center GmbH & Co.
Preface Dear customers, many thanks for your purchase of this wireless panic button. In choosing our product, you now have a piece of equipment that is built according to state-ofthe-art technology. This product complies with current domestic and European regulations. Conformity has been proven, and all related certifications are available from the manufacturer on request.
Battery warning! The device is supplied with direct current from a 3 V lithium battery. To guarantee a long working life and avoid fire and injury, please note the following: Do not dispose of the battery in domestic waste. The battery must not be directly exposed to heat or sunlight, and must not be stored in a place with a very high temperature. The battery must not be burned. The battery must not come into contact with water. The battery must not be dismantled, pierced or otherwise damaged.
Depending on the centre settings, this alarm is either silent or localised. The alarm is also triggered when the centre is deactivated. Technical data Power supply 3 V lithium battery (size CR2477N) Approx. 24 months II (-10 °C to +50 °C) Up to 50 m (depending on surrounding conditions) 2 Thermoplastic resin 868.
Installation Open the housing by loosening the screw under the button cover and removing the upper side of the housing. Loosen the three screws which connect the button and the transmitter with the rear of the housing. Attach the rear side of the housing to the desired position (ideally near the entrance of residential units, in sleeping quarters or underneath shop counters). Insert the supplied 3 V lithium battery (size CR2477N). Learning 1. Set the Secvest wireless alarm centre into learning mode.
3. Make sure that the button is recognised by your wireless alarm centre, then attach the remaining components. This product complies with the requirements of the EU directive: 1995/5/EC “Directive on radio and telecommunications terminal equipment and the mutual recognition of their conformity”. The declaration of conformity can be ordered from: ABUS Security-Center GmbH & Co. KG 86444 Affing GERMANY www.abus-sc.com info@abus-sc.
Préface Chère cliente, cher client. Nous vous remercions de l’achat du bouton-poussoir radio à actionner en cas d’agression. Par l’achat de ce produit, vous disposez maintenant d’un appareil développé selon l’état actuel de la technique. Ce produit est conforme aux exigences des directives européennes et nationales en vigueur. La conformité de ce produit a été prouvée. Les déclarations et documents correspondants sont consultables auprès du fabricant.
Une modification ou transformation de la structure d'une quelconque partie de ce produit n'est pas autorisée. Avertissements concernant la batterie L'appareil est alimenté en tension continue par une batterie lithium de 3 V. Pour assurer une vie de longue durée de la batterie et éviter les incendies et les préjudices corporels, tenez compte des consignes ci-après : Ne jetez pas la batterie dans les ordures ménagères.
Elle ne peut être ni démontée, ni percée, ni endommagée. Les contacts de la batterie ne doivent pas être court-circuités. Mettez la batterie hors de portée des enfants en bas-âge. La batterie n'est pas rechargeable. Introduction Le bouton-poussoir radio à actionner en cas d’agression FU8300 est un accessoire optionnel destiné à la centrale d'alarme sans fil Secvest. Il permet de déclencher discrètement une alarme anti-agression par une simple pression.
Fiche technique Alimentation : batterie lithium de 3 V de type CR2477N Durée de service de la batterie: env. 24 mois Classe environnementale: II (-10°C à +50°C) Portée: max. 50 m (suivant l'environnement) Niveau de sécurité: 2 Boîtier: matière synthétique thermoplastique Fréquence de fonctionnement: 868,6625 MHz Dimensions (HxLxP): 85 mm x 85 mm x 52 mm Installation Ouvrez le boîtier en desserrant la vis située sous le clapet de protection du bouton-poussoir et en retirant le panneau supérieur du boîtier.
vestibule d'habitation, dans les chambres à coucher ou sous les comptoirs de magasins). Introduisez la batterie lithium de 3 V de type CR2477N fournie. Apprentissage 1. Mettez votre système d’alarme sans fil Secvest en mode d'apprentissage. Tenez compte du mode d’emploi de votre centrale d'alarme. 2. Déclenchez le contact anti-sabotage du bouton-poussoir à actionner en cas d’agression pour signaler un sabotage à la centrale d’alarme sans fil.
Ce produit est conforme aux exigences de la directive européenne: Directive 1995/5/CE, R&TTE (Radio and Telecommunications Terminal Equipment) et la reconnaissance de leur conformité mutuelle. La déclaration de conformité est disponible auprès de: ABUS Security-Center GmbH & Co. KG 86444 Affing GERMANY www.abus-sc.com info@abus-sc.
Prefazione Egregio cliente, La ringraziamo per aver acquistato questo tasto radiotrasmittente antiaggressione. Con questo apparecchio ha acquistato un prodotto progettato in base agli standard tecnologici più avanzati. Questo prodotto risponde ai requisiti richiesti dalle vigenti direttive europee e nazionali. La conformità è stata comprovata e le dichiarazioni e la documentazione corrispondenti sono depositate presso la ditta produttrice.
Il prodotto nella sua interezza non deve essere modificato o trasformato. Avvertenza batteria Il dispositivo è alimentato da una batteria al litio da 3 V con tensione continua.
Introduzione Il tasto radiotrasmettitore antiaggressione FU8300 è un accessorio opzionale della centrale di allarme Secvest. Premendo il tasto scatta in modo semplice e discreto l'allarme antiaggressione. A seconda dell'impostazione della centrale, l'allarme è silenzioso o locale. L'allarme è emesso anche quando la centrale è disattivata.
Installazione Aprire l'alloggiamento svitando la vite sotto il coperchio del tasto e staccare il lato superiore dell'alloggiamento. Svitare le tre viti ulteriori che fissano il tasto e l'unità trasmittente e ricevente al lato posteriore dell'alloggiamento. Applicare il lato posteriore dell'alloggiamento del tasto nella posizione prevista (l'ideale sarebbe applicarlo nella zona d'ingresso degli appartamenti, nelle stanze da letto oppure i banche dei negozi).
riconosce il tasto e lo classifica subito nella zona “Aggressione”. 3. Accertarsi che il tasto sia stato riconosciuto dall'impianto di allarme radio e, per concludere, riavvitare i componenti. Questo apparecchio adempie ai requisiti richiesti dalla direttiva UE: Direttiva 1995/5/CE relativa ai radiotrasmittenti e agli impianti di telecomunicazione e riconoscimento reciproco di conformità. La conformazione di conformità può essere richiesta a: ABUS Security-Center GmbH & Co. KG 86444 Affing GERMANY www.
Voorwoord Geachte klant, we bedanken u voor de aankoop van deze draadloze overvaldetector. Met dit toestel heeft u een product gekocht dat met de allernieuwste techniek tot stand is gebracht. Dit product voldoet aan de eisen van de geldende Europese en nationale richtlijnen. De overeenstemming werd aangetoond, de overeenkomstige verklaringen en documenten zijn bij de fabrikant gedeponeerd.
Waarschuwingen i.v.m. de batterij Het toestel wordt door een 3 V lithium batterij van gelijkspanning voorzien. Om een lange levensduur te garanderen en brand en verwondingen te voorkomen dient u de volgende aanwijzingen in acht te nemen: Voer de batterij niet via het huisvuil af. De batterij mag niet direct aan een warmtebron of zonlicht worden blootgesteld en niet op een plaats met ene hoge temperatuur worden bewaard. De batterij mag niet worden verbrand. De batterij mag niet met water in aanraking komen.
Inleiding De FU8300 draadloze overvaldetector is een optioneel tobehoren bij de draadloze alarmcentrale Secvest. Met een druk op de knop kan u eenvoudig en discreet een overvalalarm activeren. Afhankelijk van de centraleinstelling is dit stil of lokaal. Het alarm wordt ook in gedeactiveerde toestand aan de centrale doorgegeven.
Installatie Open de behuizing door de schroef aan de onderkant van de afdekklep van de detector los te draaien en de bovenkant van de behuizing eraf te nemen. Maak de drie andere schroeven los die de detector en de zendontvangstunit met de achterkant van de behuizing verbinden. Breng nu de achterkant van de behuizing van de detector aan op de voorziene plaats (ideaal bij de ingang van woningen, in slaapkamers of onder ladetafels). Plaats de bijgeleverde lithiumbatterij van de grootte CR2477N met 3 V erin.
3. Controleer of de detector door uw draadloze alarmsysteem werd herkend en schroef de componenten vervolgens weer vast. Dit toestel voldoet aan de eisen van de EU-richtlijn: 1995/5/EG Richtlijn over draadloze installaties en telecommunicatieinrichtingen en de overeenkomstige erkenning van hun conformiteit. Deze conformiteitsverklaring is verkrijgbaar onder: ABUS Security-Center GmbH & Co. KG 86444 Affing GERMANY www.abus-sc.com info@abus-sc.
Forord Kære kunde. Tak, fordi du har valgt at købe denne trådløse overfaldsknap. Dette apparat er et produkt, som er bygget iht. den nyeste tekniske udvikling. Produktet opfylder kravene i de gældende europæiske og nationale retningslinjer. Overensstemmelsen er dokumenteret, de pågældende erklæringer og dokumenter befinder sig hos producenten.
Batteriadvarselshenvisninger Apparatet forsynes med jævnspænding af et 3 Vlitiumbatteri. For at garantere en lang levetid og undgå brande og kvæstelser skal du overholde følgende henvisninger: Batteriet må ikke bortskaffes med husholdningsaffaldet. Batteriet må ikke udsættes direkte for en varmekilde eller solindstråling og må ikke opbevareres på et sted med meget høj temperatur. Batteriet må ikke brændes. Batteriet må ikke komme i berøring med vand. Batteriet må ikke skilles ad, stikkes i eller beskadiges.
Indledning Den trådløse overfaldsknap FU8300 er et tilbehør (option) til den trådløse alarmcentral Secvest. Med et tryk på en knap kan du enkelt og diskret udløse en overfaldsalarm. Afhængigt af centralindstillingen er den stille eller lokal. Alarmen startes også, hvis centralen er i den deaktiverede tilstand. Tekniske data Spændingsforsyning: 3 V-litiumbatteri, størrelse CR2477N Ca.
Installation Åbn kabinettet ved at løsne skruen under knappens dæksel og tage kabinettets overside af. Løsn de tre andre skruer, som forbinder knappen og sende-modtagenheden med kabinettets bagside. Anbring nu bagsiden af knappens kabinet på det planlagte sted (ideelt i indgangsområdet i boliger, i soveværelser eller under diske). Sæt det vedlagte litiumbatteri, størrelse CR2477N med 3 V i. Indlæring 1. Sæt det trådløse alarmanlæg Secvest i indlæringsmodus. Brug her vejledningen til alarmcentralen. 2.
3. Kontrollér, at knappen er registreret af dit trådløse alarmanlæg, og skru derefter komponenterne sammen igen. Dette apparat opfylder kravene i følgende EU-direktiv: 1995/5/EF direktiv om radio- og teleterminaludstyr samt gensidig anerkendelse af udstyrets overensstemmelse. Overensstemmelseserklæringen kan rekvireres hos: ABUS Security-Center GmbH & Co. KG 86444 Affing GERMANY www.abus-sc.com info@abus-sc.
Wstęp Szanowna Klientko, Szanowny Kliencie, dziękujemy za zakup radiowego przycisku napadowego. Kupiłeś produkt wykonany zgodnie z najnowszym stanem techniki. Produkt ten spełnia wymagania obowiązujących norm europejskich i krajowych. Zgodność została udokumentowana, odpowiednie deklaracje i dokumenty są dostępne u producenta. Aby zachować ten stan i zapewnić bezpieczną eksploatację, użytkownik musi przestrzegać niniejszej instrukcji obsługi! Z pytaniami proszę zwracać się do specjalistycznego sprzedawcy.
Ostrzeżenia dotyczące baterii Urządzenie jest zasilane napięciem stałym przez baterię litową 3 V. Aby zapewnić długą żywotność baterii i uniknąć pożarów oraz urazów, przestrzegaj następujących wskazówek. Nie wyrzucaj zużytych baterii razem z odpadami domowymi. Baterie nie mogą być narażone na bezpośrednie działanie źródeł ciepła lub światła słonecznego ani przechowywane w miejscach o bardzo wysokiej temperaturze. Baterii nie wolno spalać. Bateria nie może kontaktować się z wodą.
Wprowadzenie Radiowy przycisk napadowy FU8300 to opcjonalny osprzęt do radiowej centrali alarmowej Secvest. Przez wciśnięcie przycisku można w łatwy i dyskretny sposób wyzwolić alarm napadowy. W zależności od ustawienia centrali alarm jest cichy lub lokalny. Alarm zostaje wysłany nawet, gdy centrala jest w stanie nieaktywnym.
Instalacja Otwórz obudowę, odkręcając śrubę pod pokrywką przycisku i zdejmując górną część obudowy. Odkręć trzy następne śruby łączące przycisk i jednostkę nadawczo-odbiorczą z tyłem obudowy. Przymocuj tył obudowy przycisku w odpowiednim miejscu (najlepiej w okolicy wejścia zespołu mieszkalnego, w sypialni lub pod ladą). Załóż dostarczoną w komplecie baterię litową 3 V typu CR2477N. Programowanie 1. Ustaw radiowy system alarmowy Secvest w trybie programowania. Uwzględnij instrukcję centrali alarmowej. 2.
3. Upewnij się, czy przycisk został wykryty przez radiowy system alarmowy i przykręć komponenty na miejsce. To urządzenie spełnia wymagania dyrektywy WE: 1999/5/WE o instalacjach radiowych i urządzeniach telekomunikacyjnych oraz wzajemnym uznawaniu ich zgodności. Deklarację zgodności można otrzymać pod adresem: ABUS Security-Center GmbH & Co. KG Linker Kreuthweg 5 86444 Affing NIEMCY www.abus.com info@abus.