Datasheet

ABUS Security-Center

GB2000

Acoustic glass breakage detector

Product highlights:

• Acoustic glass breakage detector

• Monitors entire window frontages and conservatories

• Distance to glass up to 9m

• Reliably distinguishes between shattering windows and

glasses

Use the acoustic glass breakage detector to monitor large window

frontages. The detector reacts to the specific sound of shattering

window panes. Glass breakage is detected and reported to the alarm

centre.

The acoustic glass breakage detector monitors the whole room. To

function optimally, it should face the window area to be monitored.

The best position is approx. 2-3 meters from the window. The

maximum distance – depending on glass type – is between 6m

(laminated glass) and 9m (sheet glass). The detection range of the

sensor can also be less, depending on the window's environment

(curtains, flowers, interior window blinds, reinforced glass, etc.)

The acoustic glass breakage detector reacts to the sound frequency

arising from shattering glass (low and high-frequency sound

distribution). This occurs in two steps:

- a steep amplitude increase during the glass breakage

- a weakening amplitude caused by the impact of falling glass

fragments

First the glass breakage, then the impact of the glass fragments: The

acoustic wireless glass breakage detector triggers an alarm only if

these criteria are met. This prevents an alarm being caused by ordinary day-to-day clinking noises. The area of the pane to be

monitored should be at least 30 x 30 cm.

PAGE 1
ABUS Security-Center GB2000 Acoustic glass breakage detector Use the acoustic glass breakage detector to monitor large window frontages. The detector reacts to the specific sound of shattering window panes. Glass breakage is detected and reported to the alarm centre. The acoustic glass breakage detector monitors the whole room. To function optimally, it should face the window area to be monitored. The best position is approx. 2-3 meters from the window.
PAGE 2
ABUS Security-Center GB2000 Acoustic glass breakage detector Technical Data Maximum detection range 9 metres Acoustic sensor Omnidirectional microphone Consumption 24mA at 12V DC Operating voltage 9.