assembly Instructions

i
Werksein-
stellungen
Default
Settings
Halten Sie die Reset-Taste für
ca. 5 Sekunden gedrückt, bis
die rote LED blinkt. Die Kamera
wird zurückgesetzt und startet
neu. Die Kamera ist nach
ca. 90 Sekunden wieder im
Auslieferungszustand
Hold down the reset button
for about 5 seconds until the
red LED ashes. This will reset
the camera and it will restart.
The camera will be restored
to its default settings in
approximately 90 seconds.
Android
Setup
App
- App2Cam Plus -
Download
iOS / Android
9.1
9.3
9.5
9.4
Sicherheitscode
ändern
Change
Security Code
Bei der Erstinstallation muss der
Sicherheitscode geändert werden.
Die erneute Verwendung des Standard
Sicherheitscodes „123456“ ist nicht
möglich. Es wird empfohlen
eine Kombination aus Zahlen
sowie Klein- und Großbuchstaben
zu verwenden. Die Verwendung
von Umlauten und Sonderzeichen
ist nicht möglich.
In the rst installation you will
need to change the security code.
You will not be allowed to enter the
standard security code ‚123456‘ as
your new code. We recommend using
a combination of numbers and letters
in lower and uppercase. The use of
special characters is not supported.
Conrm
Sicherheitscode ändern
•••••••
•••••••
9.2
Option 1
Option 2
Open App
App önen
App önen, Option 1 wählen
für die Einbindung über
WLAN. Für eine Einbindung
per Netzwerkkabel oder
Einrichtung einer bereits
eingebundenen Kamera
(Option 2) laden Sie die
Anleitung von der Website
abus.com/product/PPIC34520
herunter.
Open the app, select option
1 for the installation via
WiFi. For the installation via
Networkcable or adding an
existing camera (option 2),
please download the manual
from abus.com/product/
PPIC35520 website.
Die App sucht nach einer
Kamera und fährt automatisch
mit der Einrichtung fort. Sind
mehrere Kameras gleichzeitig
zur Einrichtung verfügbar,
wählen Sie eine Kamera aus
und bestätigen Sie dies mit der
Pfeil-Taste.
The app searches for a camera
and continues the installation
automatically. If several cameras
are ready for installation, please
choose one and continue with
the arrow-button.
Option 1
Option 1
OK Abbrechen
Passwort anzeigen
Signalstärke 100 %
Sicherheit: WPA2 TKIP
WLAN Passwort
WLAN Netzwerk verwalten
Kamera wurde erfolgreich
hinzugefügt
Kamera Name: HD-
W-LAN
Einrichtung
Wi-Fi Setup
Wählen Sie ihr WLAN-Netzwerk aus
der Drop-Down Liste aus. Geben Sie
Ihren WLAN Schlüssel ein und
bestätigen Sie mit OK. Die Kamera
benötigt für den Verbindungsauau
ca. 90 Sekunden.
Choose your Wi-Fi Network in the
drop down list. Type in your Wi-Fi
password and conrm with OK.
The camera needs around 90
seconds to establish the connection.
WLAN scannen
XXXXXX
Home