Manual

20
English
confirmation received", with "No, resend" you can retransmit the information. The camera now connects
to the network. This can take up to 120 seconds. You can now access the live image of the camera.
4.2.2. Alternative Installation
Open the app and click on the "+" to add a base station. Click "Alternative Installation" to add the base
station.
Go to the network settings of your device as described in the app and connect to the WLAN access
point of the base station. This can be recognized by the name "HD-XXXXXX". The password for the Wi-
Fi access point of the base station is: "12345678".
When the connection is established, click "OK" in the app. Select the WLAN of your home network from
the list of Wi-Fi networks and enter the password of the Wi-Fi of your home network. Press "OK" to
establish the connection.
The base station will now connect to the network. This can take up to 120 seconds. You can now access
the live image from the camera.
The base station takes about 120 seconds to connect to the Wi-Fi network. If the base station cannot
be reached after setup, reset the base station using the reset button and perform the steps again.