Specifications

Network Architecture
20 Connection to FOUNDATION Fieldbus IM/265/7/9/ADD/FF-EN_01
6.1 Electrical Connections
The 2600 FF is a Bus Powered device with FOUNDATION Fieldbus output. On the terminal
block, two screws for the BUS CONNECTION are available, see the Fig. 6.
The Polarity
has not consistency, so the two bus cables can be connected without take
care about the polarity.
M00508
FF
+
FF
+
FF
-
FF
-
Fig. 6: Terminal Block
The special FF connector (gland receptacles) is also available as optional item for the “quick
connection” of the transmitter to the bus.
If necessary the ground terminal could be also connected. For details about the connections,
refer to the “Fieldbus Installation & Planning Guide” document AG-165 available on the Fieldbus
FOUNDATION website (www.fieldbus.org
).