Datasheet

ABUS Security-Center
SE1000
Surface mount key-switch
Product highlights:
• High security – cannot be removed illegally
• Simple activating and deactivating
• For surface fitting
• Tamper-monitored
Use the surface mount key-switch to arm and disarm your alarm
system. Simply turn the key instead of entering a PIN code.
Operating your system is faster and easier.
Apart from the arm/disarm function of the alarm system (or
individual partitions), you can use the surface mount key-switch to
control electronic equipment (entrance lighting, garage door, etc.).
Two switch contacts are provided. You can set these as a permanent
contact or as a pulse generator.
The two coloured LEDs inform you permanently about the state of
connected devices. For example, you can see if the system is
currently armed or disarmed. The reinforced fascia plate, the
high-quality ABUS cylinder and a robust weatherproof housing (IP
55) protect the key-switch against external influences.
The surface mount key-switch is designed for half-cylinders
(10/30). It is available for both surface and flush fitting. The
surface-fitted variant is protected from tampering by a cover
contact and an anti-removal wall
contact.
© 2012 ABUS Security-Center GmbH & Co. KG, Errors and omissions excepted.