User manual

English
5. Installation
5.1. Monitor installation and mounting
1. Connect the power supply unit to the monitor.
2. Switch the device on. In order to do this, press the power button for about 3 seconds.
Important:
Please note that if the monitor does NOT have an external power supply, it must be charged
for at least 8 hours prior to being used for the first time.
The batteries will provide power for approx. 1.5 hours.
Important:
The integrated battery allows you to use the monitor flexibly.
If the battery symbol
lights up red, then the batteries require charging. Please note that
the battery must always be charged sufficiently in order to ensure loss-free recording.
You can set up the monitor on an even surface using the stand.
For a flush mount, mark two drill holes 10 cm apart at the desired height on your wall. Now drill the two
holes and insert the supplied screw anchor.
Screw the screws into the screw anchors, leaving the screws protruding slightly. You can now hang
the monitor on the screws. Gently pull the monitor downwards in order to lock it in place.
41