Installation guide

Secvest 2WAY Wireless Alarm System
www.abus-sc.com
The Secvest Key 2WAY wireless
cylinder is the most convenient
option for controlling the
Secvest 2WAY. It gets deactivated
automatically upon unlocking and
activated upon locking.
When you leave the house, just
push the button and activate by
locking up. You receive an acoustic
confirmation.
Secvest Key 2WAY
Article number FU5897-8, FU5900-FU5981, FU5983-FU5990
Product features
First wireless arming cylinder in the •
world
Activating and deactivating the Secvest •
2WAY Convenient one-button operation
Acoustic status notification •
Can be integrated into locking systems•
Available in different lengths •
Scope of delivery Secvest Key 2WAY, 3 keys per closing,
mounting key, 3V lithium battery
(FU2990), manual
Wireless technology
Frequency: 868 MHz,
Transmission power: 10mW
Housing material ABS
Operating
temperature
-10°C to +55°C
Weight 100g (without cylinder and battery)
Outside dimension mm 30 35 35 40 40 45 45 50
Inside dimension mm 35 35 40 40 45 40 45 45
Article number FU5901 FU5910 FU5911 FU5920 FU5921 FU5929 FU5930 FU5939
Just one push - for comfort and
security
The bidirectional Secvest 2WAY wireless
remote control allows operating the alarm
system with a push of a button. Furthermore,
you can check the current status of the
system. You activate and deactivate the alarm
system and receive immediate feedback via
the four integrated LEDs. You can manually
trigger a hold-up alarm and also switch an
output.
All entrances "safe" - with the keypad
Per PIN code you can control your system
from any wireless keypad. If the wireless
keypad has an external 12V power supply,
you can also activate and deactivate using
a proximity chip key. Up to 4 keypads
can be integrated in the alarm system.
Installed in different parts of your building,
these expansion modules provide added
convenience.
Security in one turn - with the
wireless key switch
No more forgetting your PIN code due to the
wireless key switch: This device out of the
Secvest range replaces entering the code at
the control panel or keypad by simply turning
a key. Two integrated LEDs show the system
status. False alarms due to unknown status
are thus avoided.
Strike plate
Strike plate
Lock bit
Fastening bolt
Plate
Outside dimensions
Inside dimensions
Installing the wireless cylinder is
extremely easy: Pull the old cylinder out
and insert the wireless cylinder. The door
knob is located at the inside of the door.
Attach the Secvest Key with a forend
screw. The wireless cylinder fits all doors
with Euro profile. For simple
and precise measurement use
the ABUS gage that you can
order for free.
Peep!
Other cylinder lengths available in the webshop www.abus-sc.com or upon request. Retrofitting of cylinders of other manufacturers is also possible.
New
sensor
technology
An overview of our most popular models