Operation Manual

ManualsBrandsAbus ManualsDigital recorderTVHD800x0

100

Recording

 At Copy you can take on this setting for other days or

the whole week.

6. Finalize your settings in the record screen with Apply

and then OK.

Encoding

TAB Record

The following setting possibilities are available in this

sub-menu:

Camera

Camera to be set

Input Resolu-

tions

displays the incoming, and thus the

maximum, resolution of the camera

Encoding Pa-

rameters

Stream 1: Properties for continuous

recording

Stream 2: Properties for event re-

cording (Alarm / motion)

Stream 3: Properties for network

transmission

Stream Type

Video

Video & Audio

Resolution

1920x1080, 1280x720,

4CIF(704x576), CIF(352x288),

Bitrate Type

In general, the higher the bit rate, the

more storage space is required.

Variable:

Static image – low bit rate; dynamic

image – high bit rate

Constant:

Bit rate remains constant (at maxi-

mum bit rate)

Video Quality

There are various quality levels:

+: Low quality

++++++: High quality

Frame Rate

Number of images saved per second.

The maximum number is dependent

on the set resolution.

Max. Bitrate-

Mode

Select between free entry of bit rate /

list of standardized bit rates

Max. Bitrate

(Kbps)

Defines the maximum bit rate for the

“Constant” bit rate type

1. Select the camera.

2. Select the stream where the specifications should be

defined:

 Stream 1 (Continuous)

 Stream 2 (Event)

 Stream 3 (Network)

3. Define the recording parameters for the correspond-

ing stream (see table).

4. Under More, select the period for the pre-alarm,

post-alarm etc.

5. Click on Copy to take on these settings for other

cameras.

For detailed settings click on More.

Confirm the settings by clicking on Apply and leave the

menu with OK.

Pre-record

Recording period before an alarm

(in seconds)

Post-record

Recording period after an alarm

(in seconds)

Expired Time (day)

Period (in days) after which the

recording is deleted automatically

at 00:00. The event remains in the

log file.

0: Recordings are not deleted

automatically

Redundand Re-

cord/...

Choose wheter the data shall be

overwritten when HDD is full

Record Audio

Audio record yes/no