instructions User Manual

ManualsBrandsABUS ManualsVideo surveillance systemsTVHD80110 Operating

100

Camera

Parameter

Notification

Full Screen Monitoring

The camera is displayed as

a full-screen picture in live

cast

Audible Warning

The device emits a repeat-

ing tone

Notify CMS

Sends an alarm signal to a

PC with ABUS CMS soft-

ware. The software must be

enabled and the recorder set

to surveillance mode on the

PC.

Send E-Mail

An e-mail is sent to a specif-

ic e-mail address

Trigger alarm output

See page 46

 Confirm the settings by clicking Apply and leave the

menu with OK

Video signal loss

Select the camera channel under “Camera”.

Set the checkmark for the alarm in the event of a “Video

Loss”.

Armin Schedule

Select the TAB Arming Schedule.

Here you set the times when the reactions in the TAB

Reaction are triggered.

1. Select the day and enter the schedule.

Note

You can define up to 8 time periods (each from

00:00 to 00:00). The times in the individual peri-

ods must not overlap.

2. Select whether the settings should be applied to all

days of the week with using Copy.

3. Confirm the settings by clicking Apply and leave the

menu with OK.

Handling

Click on the TAB Handling.

Here you can configure the behavior of the recorder dur-

ing a detected event (for example: motion got detected)

by clicking the respective check box.