Operation Manual

104
Night IR mode: Auto: The IR cut filter is activated and deactivated automatically according to the
threshold setting limits.
On: The IR cut filter is permanently activated (day mode).
Off: The IR cut filter is permanently deactivated (night mode).
IR level: The intensity of the IR LEDs can be set on 2 or 3 levels.
TVIP31000–TVIP31550: Level 1 (5 metres)/level 2 (10 metres)
TVIP71500–TVIP71550: Level 1 (5 metres)/level 2 (10 metres)/level 3
(15 metres)
ICR switch delay: The switching of day/night mode can be delayed by up to 10 seconds.
Threshold: Light – The higher the value, the earlier the camera deactivates the IR cut filter/IR light.
Dark – The higher the value, the earlier the camera activates the IR cut filter/IR light.
Host name: Enter the network host name here. The maximum length is 32 characters.
Status LED: Switches all status LEDs on the rear on or off.
Text overlay: The “Alias” setting, plus the date and time (optional) can be displayed in the video
image.
Text colour: Specifies the colour of the displayed text.
Background colour: Specifies the background colour of the displayed text area.
Alias: Description for the display in the video image.
Date/time: The date and time can be displayed in the video image.
Display position: Specifies the position of the displayed text overlay.
Privacy mask: Alternatively, an area of the video image can be masked off and thus hidden from view.
Accept the settings by pressing “OK” or cancel them by pressing “Abbrechen”.