Operation Manual

106
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.
MPEG-4
Viewer authentication: Settings for the user name and password entry when requesting video files
(e.g. using VLC Media Player or Quicktime Player).
On: The user name and password are requested after video data is entered and
called up.
Off: The security query is not made. The video stream can be received directly (e.g.
by entering rtsp://IP:RTSP-Port/video.mp4 as a URL).
Multicast streaming: (See above under “H.264”).
Multicast address: Entry of the Multicast server address.
Video port: Automatic or manual assignment of the Multicast video port.
Time-To-Live: Length of time the packet is kept before being discarded.
Image Size: Select from the following image resolutions (pixels): 1280x1024, 1280x720,
640x480, 320x240.
Frame rate: Specifies the frame rate in frames per second (fps).
Quality: Settings for the quality of the video stream.
Auto: The video quality is adjusted automatically according to the available network
bandwidth.
Fixed quality: The video quality is set to a fixed level. The network bandwidth requirements
can rise or fall according to demand.
Fixed bitrate: The bit rate of the video stream is set to a fixed level. The video quality can
vary according to the level of activity.
IP interval: This parameter specifies the full-screen interval. The full-screen interval (IP
interval) specifies how often a full-screen image is contained in the video
stream (differential image procedure, MPEG-4). A lower value requires more
network bandwidth, but leads to an improvement in image quality.
Accept the settings by pressing “OK” or cancel them by pressing “Cancel”.