Operation Manual

113

Note down your user data and enter this into the configuration of the network camera.

Accessing the network camera over DDNS

If the network camera is positioned behind a router, then access via DynDNS must be configured in the

router. A description of the DynDNS router configuration for common router models can be found on the

ABUS Security-Center website: www.abus-sc.com

The following diagram offers an overview of accessing a network camera behind a router via DynDNS.org.

Accept the settings by pressing “OK” or cancel them by pressing “Cancel”. If the

network configuration is changed, then the camera must be restarted (System \

Initialize \ Restart).

UPnP

UPnP (Universal Plug and Play) allows the comfortable control of network devices in an IP network. The

network camera can then be seen in the Windows network environment (e.g. as a network device).

UPnP: Activates or deactivates the UPnP function.

Port forwarding of all relevant ports (at least RTSP + HTTP) must be set up in the router

in order to use DynDNS access via the router.

DynDNS.org

name server

 htt

://name.d

ndns.or

:1026

 name.dyndns.org:1026  195.184.21.78:1026

 195.184.21.78:1026



195.184.21.78:1026

 192.168.0.1

LAN WAN

Internet