Operation Manual

126
The settings can be tested using the “Test” button. Accept the settings by
pressing “OK” or cancel them by pressing “Cancel”.
Alarm sending
Alarm sending: Activates or deactivates the transmission of image data to an e-mail address
over an SMTP server.
File attachment: Specify whether the e-mail should have an attached file here (image data).
Image file name: Specify the file name for the image/video file here.
Suffix: Select the file suffix here. This can be the date and time or a sequence
number.
Delete sequence number: Resets the sequence number to 1.
Alarm: In the event of an alarm, certain reactions can be configured for SMTP
transmission here. A button for configuring the corresponding alarm detector is
available for each entry (if configuration of the detector or trigger is possible).
Effective Period:
Always: The detectors for these alarms are permanently activated.
Schedule: The detectors for these alarms are activated at defined schedules. Press the
“Schedule” button to configure these settings (see also the “Schedule” section).