Operation Manual

131
Please use „Format“-function when SD-Card is inserted the first time.
Memory Card: Activates or deactivates SD-Card function
Card Status: Shows remaining capacity and available capacitiy on SD-Card in Kbytes.
Card status notification: Activate or deactivate capacity warning function for SD-Card.
This function enables camera to send e-mail notification of current SD-Card
status. Eyerytime status is changed a e-mail will be send out.
Example: Card status normal
Example: SD-Card removed/not inserted/damages
SMTP server name: Enter the SMTP server name of the e-mail sender here (e.g. smtp.web.de).
The maximum length is 64 characters.
SMTP server port: The default SMTP server port is 80. An alternative port can be specified here,
if required.
SSL: If the e-mail server uses SSL, then this can be activated here.
Authentication: Specify the authentication type for the e-mail account here.
SMTP: If authentication is made using a user name and password on the e-mail
POP before SMTP: Select this option if the send/receive e-mail function is required before e-mails
are sent. It may be possible to delete “POP before SMTP” in the e-mail
account settings.
POP server name: Enter the POP server name of the e-mail sender here (e.g. pop.web.de). This
option is only available when “POP before SMTP” is active. The maximum
length is 64 characters.