User manual

Camera
100
Armin Schedule
Select the TAB Arming Schedule.
Here you set the times when the reactions in the TAB
Reaction are triggered.
1. Select the day and enter the schedule.
Note
You can define up to 8 time periods (each from
00:00 to 00:00). The times in the individual peri-
ods must not overlap.
2. Select whether the settings should be applied to all
days of the week with using Copy.
3. Confirm the settings by clicking Apply and leave the
menu with OK.
Handling
Click on the TAB Handling.
Here you can configure the behavior of the recorder dur-
ing a detected event (for example: motion got detected)
by clicking the respective check box.
Parameter
Notifications
Full-screen pop-up
The camera is displayed as
a full-screen picture in live
cast
Audible Warning
The device emits a repeating
tone.
Notify CMS
The CMS emits an audible
warning tone.
Send email
An email is sent to a specific
email address. See page 29
Trigger alarm output
The alarm output is triggered
in the event of an alarm.
 Confirm the settings by clicking Apply and leave the
menu with OK