User manual

System Settings
Note
The “System Settings” menu is used to manage
all device settings.
Warning
Ensure that the date and time are set correctly.
IMPORTANT:
Subsequent changes to the settings can lead to
data loss!
Ensure a data backup has been made in good
time beforehand.
Overview
Menu Setting
General
Language, video, time, date,
mouse pointer, password, time
zones and other settings
Camera
Adding, changing and selecting
analogue and IP cameras
Record
All recording settings (type,
resolution, motion detection,
schedule etc.)
Network Re
quired network settings
(manual IP, DHCP, PPPOE,
DDNS etc.) and network status
overview
Alarm
Assignment and parameteris
tion of detectors to alarm inputs
and relay outputs
PTZ
PTZ hardware parameters and
assignment to camera inputs
The “System Settings” menu is used to manage
Ensure that the date and time are set correctly.
Subsequent changes to the settings can lead to
Ensure a data backup has been made in good
Page
Language, video, time, date,
mouse pointer, password, time
Adding, changing and selecting
analogue and IP cameras
40
All recording settings (type,
resolution, motion detection,
24
quired network settings
(manual IP, DHCP, PPPOE,
DDNS etc.) and network status
49
Assignment and parameteris
a-
tion of detectors to alarm inputs
54
PTZ hardware parameters and
assignment to camera inputs
28
Menu Setting
RS232
Parameters on the serial conne
tion
Display
Display settings and assignment
of the event output
Exception
Behaviour of the device in exce
tional cases (HDD full, network
disconnected etc.)
User
Adding and changing users, a
signing authorisation rights
UVV
Loading of settings requir
operation according to accident
prevention guidelines (UVV)
Note
Pay attention to the instructions in the correspon
ing sections.
General Settings
23
“General” tab Setting
Language
Language on the OSD
CVBS Output
Standard
PAL / NTSC
VGA Resolu-
tion
Resolution on the monitor
Time Zone
GMT (Greenwich Mean Time)
Menu Date
Format
MM-DD-
YYYY, DD
YYYY-MM-
DD
System Time
Date and time
Mouse Pointer
Speed
Set on the scroll bar (left =
low speed; right = high speed)
Enable Pass-
word
Box not
check
Box check
ed: Password must be e
tered in order to use the menu
Device menu
39
Page
Parameters on the serial conne
c- 43
Display settings and assignment
of the event output
23
Behaviour of the device in exce
p-
tional cases (HDD full, network
disconnected etc.)
44
Adding and changing users, a
s-
signing authorisation rights
44
Loading of settings requir
ed for
operation according to accident
prevention guidelines (UVV)
45
Pay attention to the instructions in the correspon
d-
Language on the OSD
PAL / NTSC
Resolution on the monitor
GMT (Greenwich Mean Time)
YYYY, DD
-MM-YYYY,
DD
Date and time
Set on the scroll bar (left =
low speed; right = high speed)
check
ed: No password
ed: Password must be e
n-
tered in order to use the menu