User manual

Network

1. Enter the parameters of the e-mail notification.

2. Click on Test to send a test e-mail.

Note

The device sends an e-mail to the specified re-

cipients.

If the e-mail is not received, check the settings

and correct them.

If necessary, check the spam filter of your e-mail

client.

Network Status

Click on the “Network Status” tab to see an overview of

the current network configuration.

Legen Sie i

Parameter Setting

DHCP Status:

When DHCP is active, the correspond-

ing parameters are shown. “N/A” is

displayed when DHCP is inactive.

PPPOE

Status:

Shows whether an Internet connection

is established during manual set-up.

Also displays the IP address, subnet

mask and defined default gateway.

Note: If a router is used which is set up

as the gateway / DSL modem, then the

PPPOE settings of the router are used.

The display then shows “N/A”.