AXIAL SERIES PROJECT COOLING FANS USER MANUAL
WELCOME Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information. EMAIL support@acinfinity.com WEB www.acinfinity.
MANUAL CODE AF2006X1 PRODUCT AXIAL 8025 AXIAL 8038 AXIAL 9225 AXIAL 9238 AXIAL 1225 AXIAL 1238 AXIAL 1751 AXIAL 2589 AXIAL 2060 AXIAL S1225 AXIAL S1225D AXIAL S1238 AXIAL S1238D AXIAL LS1238 4 MODEL HS8025A-X LS8038A-X HS9225A-X HS9238A-X LS1225A-X HS1238A-X HS1751A-X HS2589A-X HS2060A-X AI-120SCX AI-120SCXD AI-1238SCX AI-1238SCXD LS1238A-X UPC-A 854759004259 854759004273 854759004228 854759004266 854759004211 854759004181 854759004303 819137020894 819137021402 854759004129 854759004150 819137020078 819
MANUAL INDEX Manual Index ................................................................................. Page 5 Fan Specifications ......................................................................... Page 6 Key Features ................................................................................. Page 7 Product Contents ........................................................................... Page 8 Fan Replacement ..........................................................................
FAN SPECIFICATIONS CASE SIZE Square axial fans come in the standard sizes set by the industry. They are commonly quoted with millimeters in the format length time height times width. A case size measuring 120 mm tall, 120 mm long, and 38 mm wide may be quoted as 120 x 120 x 38 mm. CURRENT AND VOLTAGE Fans designed to be powered by alternating current are known as AC fans. They are available in two voltage ranges, 100 to 125V, and 200 to 240V.
KEY FEATURES ALUMINUM HOUSING A heavy-duty construction allows the fan to be used in harsh environments and withstand shock. THERMOPLASTIC PBT Materials used in the blade and impeller meet UL 94 standards for resistance to flammability. METAL FAN GUARD Premium steel fan guards with a black powder-coated finish to shield foreign objects and fingers from the fan blades. MOTOR PROTECTION Impedance-protected motors have windings that have a higher resistance to heat during a rotor lock.
PRODUCT CONTENTS AXIAL 8025 AXIAL 2060 AXIAL 2589 HS8025A-X HS2060A-X HS2589A-X AXIAL FAN (x1) AXIAL S1225 AXIAL 9225 AXIAL 9238 AXIAL LS1238 FAN GUARDS (x2) AI-120SCX HS9225A-X HS9238A-X LS1238A-X SCREWS (x4) AXIAL 9225 AXIAL 9238 AXIAL 8038 AXIAL 1751 LS1225A-X HS1238A-X HS8038A-X HS1751A-X POWER CORD (x1) AXIAL S1238 AI-1238SCX M L AXIAL FAN (x1) FAN GUARDS (x2) AXIAL S1225D AI-120SCXD SCREWS (x4) HINGE (x1) H SPEED CONTROLLER (x1) AXIAL S1238D AI-1238SCXD M L AXIAL FAN (x2) 8 FAN G
FAN REPLACEMENT STEP 1- COMPATIBILITY Before you begin, please make sure that your new fan has a case size and voltage range that is compatible with the previous fan. Please turnoff any power going into your old fan. ? ? STEP 2 - PREVIOUS FAN HAS TERMINAL CONNECTORS If the fan you are trying to replace has terminal connectors, detach its power connector from the terminals by pulling it off the fan.
FAN REPLACEMENT STEP 2 - PREVIOUS FAN HAS WIRED CONNECTORS If the fan you are trying to replace has permanent wires connected to the power source that can’t be removed by pulling on it, cut the wire to remove the previous fan. Then take the power plug cord included in this kit and remove the head with a wire stripper. Under the cords plastic should be two identical wires with their tips exposed. STEP 3 - WIRING (LEADS) The previous power source should have a set of two wires.
FAN REPLACEMENT STEP 4 - CONNECTING You can connect the two wire pairs by using a connect or block or electrical tape and wire connectors. Exposed wires and terminals can be hazardous when the fan is powered. STEP 5 - TERMINALS Mount the new fan into position using the previous fan’ s hardware. Then attach the power cord’s connectors onto the terminals of your new fan.
MOUNTING Please see page 14 for Hinge Mounting Instructions for Speed Control Fan Kits. STEP 1 - MARKING Use the fan to determine the exact position where you wish to mount it. Outline the center circle and four outer screw holes with a pencil. STEP 2 - DRILLING Attach a hole saw onto the power drill, create the center hole as outlined by your markings from the previous step. The hole saw size is dependent on the fan’s case size.
MOUNTING STEP 3 - POSITIONING Position the fan against the hole just created. Place a wire guard over the fan’s side and another guard on the opposite end while keeping the screw holes aligned. STEP 4 - MOUNTING Mount the unit using four machine screws while holding each corresponding nut in place. Use a screwdriver to finish tightening the unit securely. Please see page 15 on instructions on powering the fan.
MOUNTING Hinges are only included with Speed Control Fan Kits: S1225, S1225D, S1238, and S1238D. STEP 1 - ATTACHING HINGE To attach the hinge that is included in the kit, slide the screw through the front end of the fan and the hinge as shown. Tighten the screw appropriately. STEP 2 - MOUNTING HINGE To mount the hinge on to your setup, use the included wood screw to drill into position.
POWERING STEP 1 - TERMINAL After mounting your fan you can then attach the power plug cord onto the fans terminal. STEP 2 - POWERING Lastly, plug the cord’s head into a standard outlet. You may also power the fan with a wired power source, please see page 10 and 11.
SPEED CONTROLLER Only included with models S1225, S1238, S1225d, and S1238D LIGHT INDICATOR When the light is lit up then the speed controller is turned on and is receiving power. When the light is off then so is the controller and fan. M ON To turn on the fan, turn clockwise until you feel a click and then keep turning until the fan is at full power. OFF To completely shut off the fan, keep turning the knob counter-clockwise until you feel a click.
AC INFINITY PRODUCTS AIRPLATE SERIES The AIRPLATE series is designed to cool home theater and audio video cabinets. The fans are powered by USB port or power outlets. Includes an inline speed controller and Boost Speed Adapter. The fans can also be temperature controlled with an Advance Thermal Controller (sold separately). PRODUCT AIRPLATE S1 AIRPLATE S3 AIRPLATE S5 AIRPLATE S7 AIRPLATE S9 MODEL AI-CFS80BA AI-CFS120BA AI-CFD80BA AI-CFD120BA AI-APS9 DIMENSIONS 4.6 x 4.6 x 1.3 in. 6.3 x 6.3 x 1.3 in. 8.
WARRANTY This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues. The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships.
COPYRIGHT © 2020 AC INFINITY INC. ALL RIGHTS RESERVED No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
www.acinfinity.
