Owners Manual

PROGRAMMING
18
1. MODE BUTTON
Cycles through the modes:
AUTO, SMART, SPEED,
ALARM, BUFFER. Holding
for three seconds will lock or
unlock the display.
2. UP / DOWN BUTTON
The up and down buttons
changes the setting temp,
alarm temp, display
brightness, or the speed
of the fan.
3. LEAF BUTTON
This turns the display off
while programs run in the
background. Holding will
change degrees to
Fahrenheit or Celsius.
4. SETTING TEMP.
Shows the temperature you
set the fans to trigger in
AUTO and SMART Mode.
5. ALARM TEMP.
Shows the temperature
that you set the fan’s
alarm system to trigger.
Please see page 21
for more information.
6. PROBE TEMP.
Actively shows the current
temperature that the probe
is measuring.
7. FAN SPEED
Shows what speed the fans
are currently running at.
Six speeds are available.
8. BUFFER
The buffer range settings
of AUTO and SMART
Mode programming.
Please see page 20
for more information.
9. ALERT ICONS
Flashes to indicate if check
fan alert, alarm, or display
lock is being triggered.
F
o
F
o
F
o
F
o
SETTING
PROBE
AUTO
ALARM
SPEED
BUFFER
1
5
9
7
8
2
3
4
6