Owners Manual

PROGRAMMING
QUICK START
Press the MODE button until you are on AUTO mode. This mode works like a thermostat.
Press the up and down triangle buttons to change the SETTING temperature on the screen.
The PROBE temperature is what the thermal probe is measuring. When the PROBE temper-
ature exceeds the SETTING temperature, the fans will start running.
SPEED SETTING
In this mode, the fans will run non-stop
regardless of temperature. Pressing the
up and down buttons while in this mode
will change the speed of the fan.
Whichever speed is designated in this
mode will also be the speed used in
AUTO Mode and the max speed of the
fans in SMART Mode.
19
F
o
F
o
F
o
F
o
SETTING
PROBE
SPD
ALARM
SPEED
BUFFER
F
o
F
o
F
o
F
o
SETTING
PROBE
ALARM
SPEED
BUFFER
AUTO
AUTO MODE
This is the thermostat setting where the fans
will start running when the PROBE temperature
reaches or surpasses the SETTING temperature.
The SETTING temperature can be designated by
pressing the up and down buttons while in this
mode. Once the fans start running, the PROBE
temperature will need to fall at least 4° F
below the SETTING temp for the fans to stop
running. This variation buffer can be changed.
Please see page 20 for more information.