Owners Manual

23
PROGRAMMING
ALERT ICONS
On the bottom right of the display there are three alert icons. They are visible to
show that the system’s functions are being monitored. They will flash when the
controller wishes to alert you that a particular function is being triggered.
DISPLAY LOCK ALERT
This icon is not visible when the controller is unlocked.
The icon will flash when any buttons are pressed while
the controller is locked. Please see page 22 for more
information.
ALARM ALERT
The alarm alert icon will flash when the probe temperature
reaches or exceeds the alarm temperature you have set.
Please see page 21 for more information on setting up the
alarm.
CHECK FAN ALERT
This icon will flash when the fan’s sensor detects interference
to its operation. Please check the fan for possible issues. If
the fan is rotating, it may just be static pressure resistance
and operating as intended. If the fan is not rotating, please
see the warranty page for replacement information.
F
o
F
o
F
o
F
o
SETTING
PROBE
ALARM
SPEED
BUFFER
SMART
o