Owners Manual

14
PROGRAMMING
AIRCOM T8 T9 T10
1. MODE BUTTON
Cycles through the unit’s
modes: AUTO, SMART, OFF,
ON, ALARM. Holding for
three seconds will lock or
unlock the display.
7. FAN SPEED
Shows what speed the fans
are currently running at. Six
speeds are available.
4. SETTING TEMP
Shows the temperature you
set the fans to trigger in
AUTO and SMART Mode.
8. BRIGHTNESS
Shows the brightness of
the display. Four settings
are available.
5. ALARM TEMP
Shows the temperature
that you set the fan’s alarm
system to trigger.
9. ALERT ICONS
Flashes to indicate if check
fan alert, or display lock is
being triggered.
6. PROBE TEMP
Actively shows current
temperature that the probe
is measuring.
2. UP / DOWN BUTTON
The up and down buttons
changes the setting
temp, alarm temp, display
brightness, or the speed of
the fan.
3. LEAF BUTTON
This turns the display off
while programs run in
the background. Holding
will change degrees to
Fahrenheit or Celsius.
9
1
3
2
4 5 6
7 8