Owners Manual

16
PROGRAMMING
AIRCOM T8 T9 T10
OFF MODE
In this mode, the fans are powered off regardless of set
temperature or set speed. The backlight setting can be
increased or decreased by pressing the up or down buttons
while in this mode. If the first and the third brightness bar
light up and the device is left unattended for 30 seconds,
the display will automatically dim its brightness back to the
dimmest setting.
SMART MODE
This is the energy saving mode where the fans will change
speed depending on the temperature. The SETTING
temperature can be designated by pressing the up and down
triangle buttons while in this mode.
For every 4°F increment that the PROBE temperature is
below the SETTING temperature, the speed of the fans will
decrease by one level. This increment can be changed to
2°F, please see page 18 for more information.
The fan speed you designated in ON Mode will also be
the max speed the fan’s can reach. This occurs when the
PROBE temperature reaches or exceeds the SETTING
temperature.