Owners Manual

19
PROGRAMMING
AIRCOM T8 T9 T10
ALERT ICONS
On the bottom right of the display there are three alert icons. They are visible to show that the
system’s functions are being monitored. They will flash when the controller wishes to alert you that
a particular function is being triggered.
CHECK FAN ALERT
The check fan icon will flash when the fan’s sensor detects interference to
its operation. Please check the fan for possible issues. If the fan is rotating, it
may just be static pressure resistance and operating as intended. If the fan is
not rotating, please see the warranty page for replacement information.
ALARM ALERT
The alarm alert icon will flash when the probe temperature reaches or
exceeds the alarm temperature you have set. Please see page 17 for more
information on setting up the alarm.
DISPLAY LOCK ALERT
This icon is not visible when the controller is unlocked. The icon will flash
when any buttons are pressed while the controller is locked. To lock or unlock
the controller, hold down the MODE button for three or more seconds.