Owners Manual

13
PROGRAMMING
AIRCOM S6 S7 S8 S9 S10
MODE CONTROL
Pressing the Mode Control button will cycle through the operating modes: ON
Mode, AUTO Mode, SMART Mode and OFF Mode.
ON MODE - A white light as shown on page 12 indicates if the system is running in
ON Mode. In this mode, the fans will run continuously regardless of temperature.
AUTO MODE - An orange light as shown on page 12 indicates if the system is
running in AUTO Mode. In this mode, the fans will only be triggered to run when
the temperature is at 88° F or higher. While running, the fans will turn off when the
temperature is at 84° F or lower.
SMART MODE - Both the orange and white light will be visible to indicate if the
system is running in SMART Mode. In this mode the fans will change speed
depending on the measured temperature. For every 2° F increment that the
temperature is below 88° F, the speed of the fans will decrease by one level.
OFF MODE - In this mode, the white and orange light will not be visible; and the
fans will not run regardless of temperature.
SPEED CONTROL
While in ON, AUTO, or SMART Mode, you can press this button to change the
speed settings. In ON Mode, you can set what speed the fans will run continuously
at. In AUTO Mode, pressing this button will set what speed the fans will run at when
they are triggered to run. In SMART Mode, the speed you set will be the highest
speed the fans can reach at 88° F; and drop by one level for every 2° F decrease.