Owners Manual

17
T-SERIES CONTROLLER
PROGRAMMING
1. MODE BUTTON
Cycles through the unit’s
modes: AUTO, SMART,
OFF, ON, ALARM. Hold
for three seconds will lock
or unlock the display.
2. UP / DOWN BUTTON
The up and down buttons
change the setting temp,
alarm temp, display
brightness, or the speed
of the fan.
3. LEAF BUTTON
This turns the display off
while allowing the
programs to run. Holding
will change degrees to
Fahrenheit or Celsius.
4. SETTING TEMP
Shows the temperature you
set the fans to trigger in
AUTO and SMART Mode.
5. ALARM TEMP
Shows the temperature
that you set the fan’s
alarm system to trigger.
6. PROBE TEMP
Actively shows current
temperature that the
probe is measuring.
7. FAN SPEED
Shows what speed the fans
are currently running at. Six
speeds are available.
8. BRIGHTNESS
Shows the brightness
of the display. Four
settings are available.
9. ALERT ICONS
Flashes to indicate if
alarm, or display
lock is being triggered.
1
3
2
ALARM
SETTING
F
o
F
o
PROBE
F
o
4
5
6
7
8
9