Instructions / Assembly

28
Note that alarm triggers can only
activate in AUTO, ON, or TIMER
Mode. Please leave ALARM
SETTING to arm the controller.
PROGRAMMING
ALARM SETTING: HIGH HUMIDITY
In this mode, pressing the up and down
button sets a high humidity alarm. The alarm
will sound and its icon will flash if the probe’s
reading exceeds the set humidity.
To activate the alarm, leave the alarm mode.
The alarm will turn OFF if the probe’s reading
falls below the trigger or if any button is
pressed. You can also set the alarm OFF by
holding the up and down buttons together.
You may set this alarm below the low humidity
trigger to create an operating range.
ALARM SETTING: LOW HUMIDITY
In this mode, pressing the up and down button
sets a low humidity alarm. The alarm will sound
and its icon will flash if the probe’s reading falls
below the set humidity.
To activate the alarm, leave the alarm mode.
The alarm will turn OFF if the probe’s reading
rises above the trigger or if any button is
pressed. You can also set the alarm OFF by
holding the up and down buttons together.
You may set this alarm above the high humidity
trigger to create an operating range.
Note that alarm triggers can only
activate in AUTO, ON, or TIMER
Mode. Please leave ALARM
SETTING to arm the controller.