WELCOME Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information. EMAIL support@acinfinity.com WEB www.acinfinity.
MANUAL CODE CP1902X1 PRODUCT CONTROLLER 12 CLOUDPLATE T1 CLOUDPLATE T1-N CLOUDPLATE T2 CLOUDPLATE T5 CLOUDPLATE T6 CLOUDPLATE T7 CLOUDPLATE T7-N CLOUDPLATE T9 CLOUDPLATE T9-N CLOUDPLATE T12 RACK ROOF FANS 4 MODEL AI-CTB12 AI-CPT1 AI-CPT1-N AI-CPT2 AI-CPT5 AI-CPT6 AI-CP2L AI-CP2H AI-CPT9 AI-CPT9-N AI-CPT12 AC-RRF7 UPC-A 819137020047 854759004976 854759004983 854759004990 819137020009 819137020016 854759004501 854759004518 819137020023 819137020030 819137020054 819137020061
MANUAL INDEX Company Contact ............................................................ Page 3 Manual Index ................................................................... Page 5 Rack Cooling Guide ......................................................... Page 6 Key Features ................................................................... Page 7 Product Contents ............................................................. Page 8 Installation ........................................................
RACK COOLING GUIDE ACCESS TO OUTSIDE AIRFLOW For the fan system to work properly, the rack fan must have access to outside air. It can be ventilation holes on the rack or on the cabinet if it’s holding an open frame rack. The holes allow the rack fan to exhaust warm air and intake cool air. INTAKE AND EXHAUST All rack fan systems should contain an intake and exhaust variable.
KEY FEATURES ALUMINIUM FRAME Features an aluminium frame with a brushed black finish and CNC machined corners give cabinets a clean look. QUIET PWM MOTOR PWM-controlled motor features precise speed control, reduced rotor noise, and runs on energy efficient DC voltage. DUAL BALL BEARINGS Fans contain long-life ball bearings rated at 67,000 hours. Also enables fans to be mounted in any direction.
PRODUCT CONTENTS CLOUDPLATE CLOUDPLATE CLOUDPLATE CLOUDPLATE CLOUDPLATE T1 T1-N T2 T5 T6 AI-CPT1 AI-CPT1-N AI-CPT2 AI-CPT5 AI-CPT6 CLOUDPLATE CLOUDPLATE CLOUDPLATE CLOUDPLATE Cooling Fan System (1) 8 AI-CP2L AI-CP2H AI-CPT9 AI-CPT9-N THERMAL PROBE (1) MOUNTING SCREWS (4) RACK ROOF FANS CONTROLLER 12 CLOUDPLATE T12 T7 T7-N T9 T9-N ZIP TIES (1) AC-RRF7 AI-CTB12 AI-CPT12 POWER ADAPTER (1) Roof Fans + Screws + Power Adapter + Speed Controller Controller + Probe + Screws + Power Adapter Controller
INSTALLATION STEP 1 Determine the position you wish to mount the rack fan unit onto your rack. Please refer to page 6 for a guide on the best fan placement to optimize cooling. STEP 2 Use a screwdriver and the included screws to secure the fan unit onto your rack. Depending on the rack rail type, you may need to install cage nuts first. Please note that some rack rails may come pre-threaded with another screw size.
INSTALLATION STEP 3 Check the included AC power adapter to make sure the power rating is compatible with your outlet. Plug the DC connector of the AC power adapter into the port labeled “POWER” on the backside of the rack fan unit. STEP 4 Plug the AC power adapter into a standard power outlet. Please check that the LCD screen is now displaying all contents and that the settings can be changed. The probe’s temperature readings will not yet be visible.
INSTALLATION STEP 5 Plug the male connector of the thermal probe into the port labeled “PROBE” on the backside of the rack fan unit. Please check that the LCD screen now displays the probe’s temperature readings. STEP 6 Secure the head of the probe onto the rack using the included cable ties. We recommend positioning the probe near your hottest equipment and away from any fans that can distort the probe’s temperature readings.
PROGRAMMING CONTROLLER 12, CLOUDPLATE T1, CLOUDPLATE T1-N CLOUDPLATE T2, CLOUDPLATE T5, CLOUDPLATE T6 CLOUDPLATE T12 SETTING PROBE 1 o 4 SPEED o F 5 o 9 o F 8 2 3 BUFFER 6 AT 1 F 7 ALARM 2 CLOUDPLATE T9, CLOUDPLATE T9-N 10 F 10 PROBE o F 4 SETTING CLOUDPLATE T7, CLOUDPLATE T7-N SPEED o F 7 o F 8 5 ALARM SETTING PROBE 1 5 o 4 SPEED o F 7 o F 8 6 BUFFER F ALARM 6 BUFFER o F 3 AUTO 9 2 3 AUTO 9 12 10 o F
PROGRAMMING 1. MODE BUTTON Cycles through the modes: AUTO, SMART, SPEED, ALARM, BUFFER. Holding for three seconds will lock or unlock the display. 2. LEAF BUTTON This turns the display off while programs run in the background. Holding will change degrees to Fahrenheit or Celsius. 3. UP / DOWN BUTTON The up and down buttons adjusts the settings of the mode that you are in. Up button increases and down button decreases. 4. PROBE TEMP.
PROGRAMMING QUICK START Press the MODE button until you are on AUTO mode. This mode works like a thermostat. Press the up and down triangle buttons to change the SETTING temperature on the screen. The PROBE temperature is what the thermal probe is measuring. When the PROBE temperature exceeds the SETTING temperature, the fans will start running. SPEED SETTING In this mode, the fans will run non-stop regardless of temperature. Pressing the up and down buttons in this mode will change the speed of the fan.
PROGRAMMING BUFFER SETTING In AUTO mode, a buffer is built in to prevent your fan from turning on and off too quickly due to small variations in the environment. In SMART mode, there is a range of temperatures between each speed. You can increase or decrease this buffer or range by pressing the up and down buttons. SMART MODE This is the energy saving mode where the fans will change speed depending on the temperature.
PROGRAMMING ALARM SETTING In this mode, you can set what temperature the system’s alarm will trigger by pressing the up and down triangle buttons. When the PROBE temperature reaches or exceeds the ALARM temperature, the alarm will activate. The alarm will only activate while the controller is in ON, AUTO, or SMART Mode so please remember to exit ALARM Mode once the alarm has been set.
PROGRAMMING FAHRENHEIT OR CELSIUS The temperatures displayed can be set to Fahrenheit or Celsius scale by holding the LEAF button until °F or °C is shown after the digits. All digits displayed will be automatically converted to the designated scale. DISPLAY BRIGHTNESS To adjust the brightness of the display, hold down the MODE button while pressing the up button repeatedly to increase the brightness. Hold down the MODE button while pressing the down button repeatedly to decrease the brightness.
PROGRAMMING ALERT ICONS On the bottom right of the display there are three alert icons. They are visible to show that the system’s functions are being monitored. They will flash when the controller wishes to alert you that a particular function is being triggered. SETTING PROBE o SPEED o F o F F ALARM BUFFER o F SMART CHECK FAN ALERT This icon will flash when the fan’s sensor detects interference to its operation. Please check the fan for possible issues.
EXTENSION FAN UNITS CLOUDPLATE SERIES To add more cooling and ventilation to your rack, you can plug in additional fans such as the RACK ROOF FAN into a CLOUDPLATE Series unit. There is a port on the backside marked “EXT.” which allows the unit to support additional fans. You can also connect one CLOUDPLATE unit to another to share the same settings; a daisy chain cord is required. The conncted CLOUDPLATE unit must be set to SPEED Settings Mode, it’s speed set to max, and the alarm turned off.
AC INFINITY PRODUCTS Register Booster Fans The AIRTAP series is a line of register booster fans designed to quietly increase airflow coming from your central heat and air conditioning systems, increasing comfort for your home. Features a thermal controller with intelligent programming that will automatically adjust airflow strength in response to heating and cooling temperatures you have set.
This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues. The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships.
COPYRIGHT © 2019 AC INFINITY INC. ALL RIGHTS RESERVED No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
www.acinfinity.