IONBOARD SERIES GROW LIGHT SYSTEM USER MANUAL1
WELCOME Thank you for choosing AC Infinity. We are committed to product quality and friendly customer service. If you have any questions or suggestions, please don’t hesitate to contact us. Visit www.acinfinity.com and click contact for our contact information. EMAIL WEB LOCATION support@acinfinity.com www.acinfinity.
MANUAL CODE IG2108X1 4 PRODUCT MODEL UPC-A IONBOARD S22 IONBOARD S24 IONBOARD S33 IONBOARD S44 AC-IBS22 AC-IBS24 AC-IBS33 AC-IBS44 819137022515 819137022522 819137022539 819137022546
MANUAL INDEX Manual Index ................................................................................... Page 5 Key Features ................................................................................... Page 6 Product Contents ............................................................................ Page 7 Installation ....................................................................................... Page 8 Power and Setup .................................................................
KEY FEATURES SAMSUNG LED DIODES EVEN COVERAGE DIMMABLE LED DRIVER Built with genuine Samsung LM301B full spectrum LEDs running at 100W & 2.6 µmol/j for high efficiency lighting. Algorithmically spaced diodes achieve wider light spread for optimized use in all grow stages while eliminating hot spots.
PRODUCT CONTENTS IONBOARD S-Series GROW LIGHT (x1) UIS M-M CORD (x1) LED DRIVER (x1) STAINLESS STEEL HANGING HOOK (x2) ROPE CLIP (x2) VELCRO TIE SET (x4) 7
INSTALLATION IONBOARD S22 / S24 STEP 1 Hang the steel hooks over your grow tent's support beams. STEP 2 While supporting your grow light, bend the steel hooks to insert the ends into the slotted holes of the end caps. Repeat this step on the other side of your grow light.
INSTALLATION IONBOARD S33 / S44 STEP 1 Insert the steel hooks into your grow light's slotted holes of the end caps. STEP 2 Position your grow tent's pole under the steel hooks. Install the pole onto your grow tent's frame. *Two people is recommended for this installation.
INSTALLATION ROPE CLIP HANGING STEP 1 Insert the steel hooks into your grow light's slotted holes of the end caps. STEP 2 Loop the rope clip hangers around your grow tent's support beams. Hook the carabiners into the steel hooks.
POWERING AND SETUP STEP 1 Plug the power cord into an AC power outlet to power your grow light. STEP 2 You may connect an external controller to set smart programming. Plug one end of the extension cord into the LED driver, and the other end into your chosen controller.
STARTER GUIDE The charts below offer suggested mounting heights and light intensities for each stage in the growing process of your preferred method. These factors will vary based on the plant you are growing. Height refers to distance from the canopy (tip of the plant). 12 HEIGHT ADJUSTMENT Seedling Stage Vegetative Stage Flowering Stage Height 3 ft. 2 ft. 1.5 ft. Intensity 100% 100% 100% LIGHT ADJUSTMENT Seedling Stage Vegetative Stage Flowering Stage Height 1.5 ft. 1.5 ft. 1.5 ft.
ADDING MORE LIGHTS AC Infinity smart controllers are equipped with multiple ports to add more grow lights and share the same programming. Refer to the diagram below to learn how to connect additional units. Smart grow light controllers can program light intensity levels and scheduled activations of all grow lights plugged into its UIS ports. An expansion dongle (sold separately) will allow you to daisy-chain additional grow lights past the number of units your controller can support.
UNIVERSAL INFINITY SYSTEM The Universal Infinity System™ enables you to connect this LED grow light with a central controller and other grow devices simultaneously. By creating this fully integrated system, you can power and program your LED grow light and all your other devices together, or separately, for optimized grow tent management. Use select smart controllers to set triggers that will activate your LED grow light based on your grow tent’s temperature and humidity.
PROGRAMMING OFF/UIS MODE Turning the knob to UIS switches the grow light off, or passes control over to your smart controller if one is connected. INTENSITY LEVEL Turning the knob from UIS will establish a set light intensity level in 20% increments, up to 100%.
AC INFINITY PRODUCTS Advance Grow Tents The CLOUDLAB series is a line of grow tents designed to create ideal growing conditions and facilitate indoor plant cultivation year-round. Features 2000D thick oxford canvas lined with inner diamond patterned mylar that maximizes grow light luminosity, and a reinforced frame with 150 lb. weight capacity. Includes a mounting plate to install your AC Infinity controller onto.
WARRANTY This warranty program is our commitment to you, the product sold by AC Infinity will be free from defects in manufacturing for a period of two years from the date of purchase. If a product is found to have a defect in material or workmanship, we will take the appropriate actions defined in this warranty to resolve any issues. The warranty program applies to any order, purchase, receipt, or use of any products sold by AC Infinity or our authorized dealerships.
COPYRIGHT © 2021 AC INFINITY INC. ALL RIGHTS RESERVED No part of the materials including graphics or logos available in this booklet may be copied, photocopied, reproduced, translated or reduced to any electronic medium or machine readable form, in whole or in part, without specific permission from AC Infinity Inc.
www.acinfinity.
