Body Repair Manual
Rear Panel, Inside and Outside/Rear Floor End
• Apply the agent to the gap between the rear panel and
rear floor.
• Apply the agent to the inside of the rear panel upper and
center frame.
• Undercoat may be used on those areas of the rear panel
that are concealed from view when parts are installed.
• Apply the agent to the inside of the jack-up stiffener.
Front Side Frame, Inside
• Remove the grommets from inside the front
compartment and coat the inside of the front side
frame.
• Coat the battery mount bracket base.
Nozzles used: A and B
Nozzle used : B
Trunk Lid Inside
• Coat the trunk lid skin, and frame seams all the way around.
• On the trunk lid, apply the agent to the inside of the
reinforcement frame.
Nozzles used: A and B
Main Menu
Table of Contents